LizardSkin® Ceramic Insulation may be a real problem solver for builders of experimental aircraft seeking a lightweight solution to heat transfer and/or noise problems. LizardSkin is easy to apply and very light weight compared to other systems, since only about 40-60 mils provide outstanding thermal and acoustic performance. In addition, it is Class A fire-rated to 500º F and environmentally friendly, with clean up requiring only a little soap & water.
The Benefits of LizardSkin® Ceramic Insulation
Never cut & paste again--NO GAPS, NO SEAMS, NO SCISSORS, NO SWEAT!
Easy spray-on application, environmentally safe, cleans up with soap & water and can be sanded and painted body color if desired.
Seamless LizardSkin Ceramic
Old-fashioned Cut & Paste Insulation
Thickness: .040"-.060"
.5" to 1"
Seamless
Many seams that separate over time
Covers body, frame and ribs
Body sections only
Apply anywhere
Not inside door panels
Applies directly
Vs.
Requires adhesives
Fast application
Labor intensive, difficult
Water resistant
Absorbs and retains water
Seals/Protects Surface
Can accelerate corrosion
Biodegradeable, non-toxic
Adhesives contain toxic chemicals
Cleans with soap & water
Solvent usually required
Low installed cost
Product installation can be pricey
Ceramic Insulation and sound control for experimental aircraft builders...