Industry Applications

  •  Street Rods & Body Shops
  •  Race Cars
  •  Kit Cars
  •  Automotive Restoration
  •  Car Stereo & Audio
  •  Recreational Vehicles
  •  Refrigerated Trucks

 Potential Uses
  •  Experimental Aircraft
  •  Light Aircraft
  •  Processing Plants
  •  Architects & Engineers
  •  HVAC & Ductwork



 
 
   
Documented Case History
Vehicle: 1966 Corvette Coupe
(Note: removal of upholstery, seats, console, carpeting, etc. as well as cleaning surface NOT included since time spent was common to both applications.)
 
Corvette before installation
Installation of LizardSkin®
Mask & tape vehicle 5.00 hrs
Spray LizardSkin (3 coats) 1.50 hrs.
Waiting time between coats 1.00 hr.

Total Install Time: 7.50 hrs.
Material Costs:
2 Buckets (4 gal.) LizardSkin®

Total Material Cost: $378.00  (BUY NOW)
 
Corvette masked off and LizardSkin application begins Corvette masked off and LizardSkin application begins
Corvette masked off and LizardSkin application begins
The "OTHER STUFF"
Installing Insulating Mat
Front floor 2.50 hrs
Rear floor 1.75 hrs.
Bulkhead/ceiling/doors 3.00 hrs.
Installing Sound Mat
Front floor 2.50 hrs
Rear floor 1.75 hrs.
Bulkhead/ceiling/doors .50 hr.

Total Install Time: 12.00 hrs.
Material Costs:
98sq/ft Insulating Mat
$750.00
76sq/ft Sound Mat
$1,170.00
1 Can Spray Glue $11.25
Total Material Cost: $1,931.25
 
Corvette masked off and LizardSkin application begins Corvette masked off and LizardSkin application begins
   

 

 

 

 

 
 
       
Ceramic insulation   •   Sound Control   •   Spray Gun Kit   •   Cost Comparison    About Us   •   Testimonials     Case History  •  Contact  •  Site Map

© 2005 LizardSkin™ is a federally registered trademark wholly-owned by LizardSkin LLC and may not be used without expressed written permission.

       

Eccomerce
Development by